{"product_id":"a-a-corvette-c5-c6-supercharger-kit-standard-vortech-si-ti-no-boost-a-pump-or-fuel-pump","title":"A\u0026A Corvette C5 \/ C6 Supercharger Kit - Standard Vortech Si\/Ti ** NO Boost-A-Pump or Fuel Pump","description":"\u003cp aria-level=\"3\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eA\u0026amp;A SUPERCHARGER SYSTEM FOR C5 CORVETTE\u003c\/b\u003e \u003cstrong\u003e** NO Boost-A-Pump or Fuel Pump\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is where it all started for A\u0026amp;A back in the 1990s.\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eC5 continues to be a great platform for supercharging due to the affordability and number of vehicles available.\u003c\/strong\u003e While some manufacturers have stopped supporting C5, \u003c\/span\u003e\u003cspan\u003ethgey\u003c\/span\u003e\u003cspan\u003e not only support, but continue to improve existing parts and design new ones. C5 is, and will continue to be, a great hotrod platform for some time.\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":1,\"335551620\":1,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eA\u0026amp;A’s C5 supercharger systems have benefited from all the innovations implemented in our C6 and C7 research and development.\u003c\/strong\u003e Each time they found a way to improve the C6 and C7 systems, they went back to C5 and did the same. The other guys just sat back and said “Our C5 systems are good enough” and have not updated their C5 systems in years.\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eAs with C6 and C7 they offer 50 State Legal (CARB EO# D-707) systems all the way up to 1000 RWHP race only kits.\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eA\u0026amp;A SUPERCHARGER SYSTEM FOR C5 CORVETTE\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp aria-level=\"3\"\u003e\u003cb\u003e\u003cspan\u003eEACH COMPLETE A\u0026amp;A SUPERCHARGER SYSTEM INCLUDES\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559738\":40,\"335559739\":0,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"1\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eProprietary Vortech head unit in Si or \u003c\/span\u003e\u003cspan\u003eTi\u003c\/span\u003e\u003cspan\u003e Trims (other sizes available)\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"2\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eFull width Ram Air Intercooler with replaceable scoop and mounting brackets\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"3\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eLarge 4 ½” inlet duct with re-usable high flow filter\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"4\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003e60# Siemens injectors (larger sizes available)\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"6\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003e38MM or 50 MM \u003c\/span\u003e\u003cspan\u003eRaceport\u003c\/span\u003e \u003cspan\u003eblowoff\u003c\/span\u003e\u003cspan\u003e valve. (52 MM “Big Bubba available)\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"7\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eNGK TR6 spark plugs pre-gapped to .035”\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"8\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eCrank pinning kit with new OE bolt\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"9\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eOur superior bracket system with fully adjustable billet tensioner\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"10\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eAluminum surround panels to enclose the radiator cavity\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"11\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003e4 ply silicone hoses formed specifically to navigate the C5 engine compartment\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"12\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eStainless steel “constant tension clamps” for secure connections\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"13\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eMandrel bent polished aluminum MAF tube with bead rolled ends (black powder coat available)\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"14\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eUpper radiator brackets to support radiator, fan and condenser assembly.\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"15\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003ePowder-coated top shroud\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"16\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eHardware kit with vacuum hoses, fittings, screws etc.\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-aria-level=\"1\" data-aria-posinset=\"17\" aria-setsize=\"-1\" data-listid=\"5\" data-font=\"Symbol\" data-leveltext=\"\"\u003e\n\u003cspan\u003eAlso included is a build sheet showing each part as it was boxed for shipping and initialed by our shipping manager.\u003c\/span\u003e\u003cspan data-ccp-props='{\"134233279\":true,\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp aria-level=\"3\"\u003e\u003cspan\u003eC5 is a “\u003c\/span\u003e\u003cb\u003e\u003cspan\u003eBottom Breather\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e”. Incoming airflow is drawn in from under the car, rather than through a large grille opening as in later models. This requires a different approach as to how to get adequate airflow through the intercooler.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eJust putting an intercooler in front of the radiator does little more than block the radiator. The factory shroud (that large plastic piece that slopes down from the top of the radiator to the front bumper) is gone, so what is there to force the air through the intercooler and radiator? Furthermore, with that shroud gone, what is there to stop the airflow from just going off into the fender wells on either side of the radiator as well as up into the bumper itself? The straight answer is NOTHING!\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eA\u0026amp;A is the ONLY system that looks at this problem and actually does something about it. They have CNC formed aluminum panels that seal this whole area off so the airflow is trapped in the radiator cavity and forced into the radiator. This approach helps engine cooling tremendously.\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eRADIATOR SURROUND PANELS KEEP AIRFLOW WHERE IT BELONGS\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe full width intercooler is sealed tightly against the front panel and has its own “scoop” to grab the airflow and force it through the intercooler itself. Again, A\u0026amp;A is the ONLY manufacturer to do this or, for that matter, anything at all to enhance airflow through the intercooler. \u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eFULL WIDTH “RAM AIR” INTERCOOLER- STANDARD IN EVERY SYSTEM\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eLARGE GAP BETWEEN THE RADIATOR AND INTERCOOLER- MUCH BETTER ENGINE COOLING!\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eINTERCOOLER AND FINS ARE ATTACHED TO FRONT SURROUND PANEL TO SEAL IN AIRFLOW\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cb\u003e\u003cspan\u003eTHE BELT TENSIONER IS ANOTHER AREA WHERE A\u0026amp;A IS KING\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e. Each tensioner is machined from 9.6 pounds of 6061 Aluminum bar. The shaft is precision machined 4340 Chromoly steel. The tensioner rotates on German manufactured bearings that are precision fit much like an engine bearing. The bores are set for a certain amount of “crush” so that the shaft to bearing clearance is within the range specified by the bearing manufacturer. Each one is hand assembled at our facility and checked for proper spring tension with a digital torque meter. NOBODY else does that but A\u0026amp;A!\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNOW THAT’S A TENSIONER! 9.6 # OF ALUMINUM BILLET BEFORE MACHINING!\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThat’s the quality side of the tensioner assembly. On the practical side, they have 3 internal spring settings. A 1000 HP drag racer obviously needs more spring pressure than a 600 HP daily driver, right? This can be accomplished with just one tensioner! We even have an optional spring for super high horsepower drag racers. There is also a “lock pin” so the tensioner can be rotated to the slack position and locked in place. This is a huge help when installing a belt, changing an alternator etc. Fighting the spring tensioner is a thing of the past.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eNo other manufacturer has a tensioner that is even close to theirs in both quality and practicality. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eTHE MOUNTING BRACKET ASSEMBLY IS ALSO STATE OF THE ART\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e.  Each plate is machined on both sides to assure absolute flatness and accuracy. Super strong bracing, Grade 8 hardware, all steel pulleys with dual bearings, stainless or aluminum \u003c\/span\u003e\u003cspan\u003estantions\u003c\/span\u003e\u003cspan\u003e for proper bearing support and our billet tensioner are all standard. The brackets are also set up to use 6 or 8 rib drive pulleys without modification, right out of the box. \u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eA\u0026amp;A’s bracket assemblies have often been described as “jewelry”.\u003c\/strong\u003e Look at the overall quality of the machine work and components. It really is a work of art.\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eSTANDARD BRACKET WITH BILLET TENSIONER- INCLUDED IN EVERY SYSTEM\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eCOMBINE THIS MUCH BELT WRAP WITH THE BILLET TENSIONER AND YOU HAVE A WINNER!\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eMAXIMUM BELT WRAP ON THE CRANKSHAFT AS WELL\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eSUPERIOR PLUMBING IS ANOTHER HIGHLIGHT OF THE A\u0026amp;A SYSTEM\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e.\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLook how the plumbing is routed through the engine compartment. To get from the supercharger outlet to the intercooler you must go behind the sway bar, over to the right side of the radiator, and then up and over the front part of the skid bar assembly. Others use 90-degree rubber hoses connected with aluminum tubes. Their rubber hoses need to be contorted to make the odd angles needed. Not A\u0026amp;A. The silicone hoses are manufactured with the correct bends to get from the supercharger to intercooler without twisting or kinking. They are also extremely strong and oil resistant.\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLook at the picture below. Do you see any 90-degree bends?\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA\u0026amp;A also uses stainless “Constant Tension” clamps on our charge tubing. These clamps expand and contract to keep the connections tight at all temperatures as well as provide 360 degree clamping force.\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eTHESE ARE THE PROPER ANGLES NEEDED FROM BLOWER TO INTERCOOLER INLET\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eA\u0026amp;A OFFERS THE LARGEST INTAKE DUCT\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e in a standard system. They designed it to clear the stock and most aftermarket radiators while maximizing airflow. There is 4 ½” on the supercharger end with appropriately sized silicone couplers for the different head units available. The oversized end allows us to have a much larger \u003c\/span\u003e\u003cspan\u003ecross sectional\u003c\/span\u003e\u003cspan\u003e area at the pinch point where it crosses over the radiator. This area is about 35% larger than other designs.\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eHUGE INLET DUCT WITH OUR HIGH FLOW, WASHABLE HIGH FLOW AIR FILTER\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNEW RADIATOR HOLD DOWN BRACKETS: \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e Manufacture laser cut, CNC bent brackets to securely hold the radiator, fan and AC condenser assembly in place. These brackets, in conjunction with the top shroud and mounting brackets make for a very stable and professional looking installation.\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNEW RADIATOR HOLD DOWN BRACKETS WITH THE TOP SHROUD\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eNEW RADIATOR TOP SHROUD MOUNTING BRACKETS\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":259}'\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp aria-level=\"3\"\u003e\u003cb\u003e\u003cspan\u003eHEAD UNITS\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559738\":40,\"335559739\":0,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eVORTECH ENGINEERING\u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-ccp-props='{\"201341983\":1,\"335551550\":2,\"335551620\":2,\"335559739\":160,\"335559740\":390}'\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cspan\u003eClearly the components and engineering they put into their systems is far ahead of the competition, but you need a powerful, efficient head unit to put it all together.\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA\u0026amp;A uses Vortech head units in all of their systems. Vortech builds the head units to their specifications under a private label agreement. We offer head units of varying sizes to accommodate different horsepower levels. \u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe Si Trim head unit is best suited for stock engines\u003c\/strong\u003e and is the only one available in our C.A.R.B. Certified kits. (available in engine oil fed or self-contained)\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Ti\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e Trim is better suited for those with headers, moderate camshafts, Methanol injection etc.\u003c\/strong\u003e and is a NO COST OPTION. (available in engine oil fed or self-contained)\u003c\/span\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559739\":160,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe YSi\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e is the KING of this family of blowers.\u003c\/strong\u003e When combined with a \u003c\/span\u003e\u003cspan\u003eproperly built engine, 8 or 10 rib belt drive, \u003c\/span\u003e\u003cspan\u003etheir\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eSecondary Drive\u003c\/span\u003e\u003cspan\u003e and\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eDual Pump Fuel System\u003c\/span\u003e\u003cspan\u003e, \u003cstrong\u003ethe \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eYSi is capable of over 1000 REAR WHEEL HORSEPOWER in a late model Corvette. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp aria-level=\"3\"\u003e\u003cb\u003e\u003cspan\u003eSUPERIOR CUSTOMER SERVICE BEFOAND AFTER THE SALE\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-ccp-props='{\"201341983\":0,\"335559738\":40,\"335559739\":0,\"335559740\":259}'\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp aria-level=\"3\"\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWe want you to have the best experience possible when dealing with us both before and after the sale.\u003c\/strong\u003e\u003c\/span\u003e You can always talk to a FI Performance sales manager, the owner and head designer of A\u0026amp;A, or one of their top techs who is infinitely knowledgeable on how the products operate and are installed. You won’t get a minimum wage customer service rep that knows nothing outside his or her script. You’ll get great advice based on many years of experience every time.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhether you are looking for a 550 horsepower\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e street car that drives like a stock car on steroids or an 8 second drag racer. We can put a package together for you to reach your goals.\u003c\/strong\u003e Combine that with the unparalleled customer support they are famous for, there is no reason to go anywhere else.  With fast ship times, you can expect your kit to be on the road within 1 week in most cases.  Custom builds add to delivery times, when we put your custom quote together, we will have a rough delivery window laid out.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"FI Performance","offers":[{"title":"Si Trim","offer_id":44852857929816,"sku":"AAsiSCkit.NO.F.PUMP","price":5750.0,"currency_code":"USD","in_stock":true},{"title":"Ti Trim","offer_id":44852857962584,"sku":"AAtiSCkit.NO.F.PUMP","price":5950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0622\/4533\/9224\/files\/A-A-Corvette-C5-C6-Supercharger-Kit-Standard-Vortech-Si-Ti-NO-Boost-A-Pump-or-Fuel-Pump-FI-Performance-23261672439948.jpg?v=1789743811","url":"https:\/\/aronsonracinglab.com\/products\/a-a-corvette-c5-c6-supercharger-kit-standard-vortech-si-ti-no-boost-a-pump-or-fuel-pump","provider":"Aronson Racing Lab ","version":"1.0","type":"link"}