{"product_id":"arl-2641-octopus-momentum-race-oil","title":"ARL-2641 Octopus Momentum Race Bearing Oil","description":"\u003ch1\u003eOctopus Momentum Race Bearing Oil by Aronson Racing Lab\u003c\/h1\u003e\n\u003cp\u003eIn dirt oval kart racing, reducing friction and maintaining smooth bearing rotation are essential to maximizing rolling efficiency. Octopus Momentum is a lightweight, low-viscosity bearing lubricant developed \u003cstrong\u003eexclusively for racing go-karts\u003c\/strong\u003e, where minimizing rotational resistance is a priority.\u003c\/p\u003e\n\u003cp\u003eDesigned for racing performance rather than extended lubrication intervals, Momentum is formulated to penetrate bearing components and provide a thin lubricating film between the balls, races, and other moving surfaces. Its low-viscosity formula is intended to reduce internal friction without the heavy resistance associated with conventional bearing greases.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDeveloped exclusively for racing go-karts\u003c\/li\u003e\n\u003cli\u003eLightweight, low-viscosity bearing lubricant\u003c\/li\u003e\n\u003cli\u003eDesigned for serviceable wheel and axle bearings\u003c\/li\u003e\n\u003cli\u003eIntended to reduce internal bearing friction and rotational resistance\u003c\/li\u003e\n\u003cli\u003eDesigned for racing applications where bearings are regularly inspected and serviced\u003c\/li\u003e\n\u003cli\u003eSupplied in an 8 oz squirt bottle\u003c\/li\u003e\n\u003cli\u003eDeveloped at Aronson Racing Lab\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for Use\u003c\/h2\u003e\n\u003ch3\u003eInitial Bearing Preparation — 48-Hour Soak\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eClean and Dry:\u003c\/strong\u003e Begin with thoroughly cleaned and completely dry racing kart bearings. Remove all existing grease, lubricants, dirt, and debris. For serviceable bearings with removable shields or seals, follow the bearing manufacturer's instructions for removal and cleaning.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSubmerge Bearings:\u003c\/strong\u003e Place the bearings into a suitable chemical-resistant container and completely submerge them in Octopus Momentum. Allow the bearings to soak for \u003cstrong\u003e48 hours\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eAgitate Bearings:\u003c\/strong\u003e After the first 8 hours of soaking, gently agitate the bearings within the lubricant at least twice during the remaining soaking period. This helps dislodge trapped air bubbles and allows the lubricant to reach internal bearing components. Gently rotate the inner races while submerged to help distribute lubricant throughout the bearing assemblies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eDrain Excess Lubricant:\u003c\/strong\u003e After 48 hours, remove the bearings and allow them to drain until no additional lubricant drips from the assemblies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eWipe Bearings:\u003c\/strong\u003e Using a clean, dry, lint-free cloth, carefully wipe away excess lubricant from the exterior of each bearing. Avoid introducing lint, dirt, or other contaminants into the bearing assemblies.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eInspect Bearings:\u003c\/strong\u003e Manually rotate each bearing to check for smooth, consistent movement. Inspect for roughness, binding, excessive play, or contamination. Replace bearings showing signs of damage or abnormal operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eReassemble and Install:\u003c\/strong\u003e Reinstall any removable bearing shields or seals according to the manufacturer's instructions. Install the lubricated bearings onto the racing kart, ensuring proper fitment and alignment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eImportant Information\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFOR RACING GO-KART USE ONLY.\u003c\/strong\u003e Octopus Momentum is developed specifically for serviceable racing kart bearing applications where low rotational resistance and frequent maintenance are priorities.\u003c\/p\u003e\n\u003cp\u003eNot all bearings are suitable for oil lubrication. Do not use Momentum in permanently sealed, non-serviceable bearings or bearings requiring grease unless the bearing manufacturer specifically approves the application. Not intended for engine, transmission, or other high-load bearing applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety:\u003c\/strong\u003e Clean and service bearings in a well-ventilated area away from sparks, flames, hot surfaces, and other ignition sources. Follow the cleaning solvent manufacturer's instructions. Wear appropriate eye protection when using compressed air, and never allow bearings to spin freely at high speed under compressed air. Ensure all cleaning solvents have evaporated completely before soaking bearings in Octopus Momentum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDeveloped at Aronson Racing Lab.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Aronson Racing Lab","offers":[{"title":"8 oz.","offer_id":67760627056728,"sku":"ARL+2641","price":18.0,"currency_code":"USD","in_stock":true},{"title":"2 Pack 8 oz.","offer_id":67760627089496,"sku":"ARL-2641x2","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0622\/4533\/9224\/files\/rn-image_picker_lib_temp_0b815ff0-886a-48b0-8b30-f0e0c453749f.png?v=1792715038","url":"https:\/\/aronsonracinglab.com\/products\/arl-2641-octopus-momentum-race-oil","provider":"Aronson Racing Lab ","version":"1.0","type":"link"}